BM Permanent Magnetic Clamping Plates wi

BidefordTool.co.uk
Engineering Tools - Hand Tools - Measuring Equipment - Carbide & Lathe Tools - Cutting & Clamping Tools - Fasteners & Abrasives

Bideford Tool Ltd, The Pill, Kingsley Road, Bideford, Devon, EX39 2PF

Home

Cutting Tools

Hand Tools

Clamping Systems

Measuring Equipment

Soldering & Welding

Abrasives

My basket

Go to checkout

BM Permanent Magnetic Clamping Plates with transverse pole p

BM Permanent Magnetic Clamping Plates with transverse pole p	Code: 39590010	£904.80
Course of strain lines: Approx. 10 mm above the pole plate, therefore no magnetisation of the workpieces. Holding power: Max. 120 N/cm² in case of ground workpiece clamping surface. Pole pitch: 8 mm in steel, 5 mm in non-ferrous Application: Construed for heavy-duty chipping. For milling, planing, drilling, grinding and eroding. Further dimensions on request. The top plate can be machined up to 15 mm deep in steel and 7 mm in non-ferrous without affecting the magnetic retention force. Fastening of the clamping plates on the table is effected by claws. The clamping plates are supplied with 2 stop shoulders. A: 250 mm B: 150 mm

Quantity

BM Permanent Magnetic Clamping Plates with transverse pole p	Code: 39590020	£1054.60
Course of strain lines: Approx. 10 mm above the pole plate, therefore no magnetisation of the workpieces. Holding power: Max. 120 N/cm² in case of ground workpiece clamping surface. Pole pitch: 8 mm in steel, 5 mm in non-ferrous Application: Construed for heavy-duty chipping. For milling, planing, drilling, grinding and eroding. Further dimensions on request. The top plate can be machined up to 15 mm deep in steel and 7 mm in non-ferrous without affecting the magnetic retention force. Fastening of the clamping plates on the table is effected by claws. The clamping plates are supplied with 2 stop shoulders. A: 300 mm B: 150 mm

Quantity

BM Permanent Magnetic Clamping Plates with transverse pole p	Code: 39590030	£1148.00
Course of strain lines: Approx. 10 mm above the pole plate, therefore no magnetisation of the workpieces. Holding power: Max. 120 N/cm² in case of ground workpiece clamping surface. Pole pitch: 8 mm in steel, 5 mm in non-ferrous Application: Construed for heavy-duty chipping. For milling, planing, drilling, grinding and eroding. Further dimensions on request. The top plate can be machined up to 15 mm deep in steel and 7 mm in non-ferrous without affecting the magnetic retention force. Fastening of the clamping plates on the table is effected by claws. The clamping plates are supplied with 2 stop shoulders. A: 350 mm B: 150 mm

Quantity

BM Permanent Magnetic Clamping Plates with transverse pole p	Code: 39590040	£1589.60
Course of strain lines: Approx. 10 mm above the pole plate, therefore no magnetisation of the workpieces. Holding power: Max. 120 N/cm² in case of ground workpiece clamping surface. Pole pitch: 8 mm in steel, 5 mm in non-ferrous Application: Construed for heavy-duty chipping. For milling, planing, drilling, grinding and eroding. Further dimensions on request. The top plate can be machined up to 15 mm deep in steel and 7 mm in non-ferrous without affecting the magnetic retention force. Fastening of the clamping plates on the table is effected by claws. The clamping plates are supplied with 2 stop shoulders. A: 400 mm B: 200 mm

Quantity

BM Permanent Magnetic Clamping Plates with transverse pole p	Code: 39590050	£1842.50
Course of strain lines: Approx. 10 mm above the pole plate, therefore no magnetisation of the workpieces. Holding power: Max. 120 N/cm² in case of ground workpiece clamping surface. Pole pitch: 8 mm in steel, 5 mm in non-ferrous Application: Construed for heavy-duty chipping. For milling, planing, drilling, grinding and eroding. Further dimensions on request. The top plate can be machined up to 15 mm deep in steel and 7 mm in non-ferrous without affecting the magnetic retention force. Fastening of the clamping plates on the table is effected by claws. The clamping plates are supplied with 2 stop shoulders. A: 500 mm B: 200 mm

Quantity

BM Permanent Magnetic Clamping Plates with transverse pole p	Code: 39590060	£2159.80
Course of strain lines: Approx. 10 mm above the pole plate, therefore no magnetisation of the workpieces. Holding power: Max. 120 N/cm² in case of ground workpiece clamping surface. Pole pitch: 8 mm in steel, 5 mm in non-ferrous Application: Construed for heavy-duty chipping. For milling, planing, drilling, grinding and eroding. Further dimensions on request. The top plate can be machined up to 15 mm deep in steel and 7 mm in non-ferrous without affecting the magnetic retention force. Fastening of the clamping plates on the table is effected by claws. The clamping plates are supplied with 2 stop shoulders. A: 600 mm B: 200 mm

Quantity

BM Permanent Magnetic Clamping Plates with fine transverse p

BM Permanent Magnetic Clamping Plates with fine transverse p	Code: 39600010	£651.87
Course of strain lines: The magnetic force building up during use is only minor, resulting in negligible residual magnetisation at the workpiece and the tool. Holding power: Max. 70 N/cm² in case of ground workpiece clamping surface. Fine pole pitch: 1.5 mm in steel, 0.8 mm in non-ferrous. Application: The clamping plates are ideal for the clamping of rather thin and small-sized workpieces. The clamping systems can also be used on electrical discharge equipment. A: 150 mm B: 100 mm C: 165 mm

Quantity

BM Permanent Magnetic Clamping Plates with fine transverse p	Code: 39600020	£856.20
Course of strain lines: The magnetic force building up during use is only minor, resulting in negligible residual magnetisation at the workpiece and the tool. Holding power: Max. 70 N/cm² in case of ground workpiece clamping surface. Fine pole pitch: 1.5 mm in steel, 0.8 mm in non-ferrous. Application: The clamping plates are ideal for the clamping of rather thin and small-sized workpieces. The clamping systems can also be used on electrical discharge equipment. A: 250 mm B: 150 mm C: 265 mm

Quantity

BM Permanent Magnetic Clamping Plates with fine transverse p	Code: 39600030	£1093.50
Course of strain lines: The magnetic force building up during use is only minor, resulting in negligible residual magnetisation at the workpiece and the tool. Holding power: Max. 70 N/cm² in case of ground workpiece clamping surface. Fine pole pitch: 1.5 mm in steel, 0.8 mm in non-ferrous. Application: The clamping plates are ideal for the clamping of rather thin and small-sized workpieces. The clamping systems can also be used on electrical discharge equipment. A: 350 mm B: 150 mm C: 365 mm

Quantity

BM Permanent Magnetic Clamping Plates with fine transverse p	Code: 39600040	£1361.90
Course of strain lines: The magnetic force building up during use is only minor, resulting in negligible residual magnetisation at the workpiece and the tool. Holding power: Max. 70 N/cm² in case of ground workpiece clamping surface. Fine pole pitch: 1.5 mm in steel, 0.8 mm in non-ferrous. Application: The clamping plates are ideal for the clamping of rather thin and small-sized workpieces. The clamping systems can also be used on electrical discharge equipment. A: 450 mm B: 150 mm C: 465 mm

Quantity

info@bidefordtool.co.uk